Disk I/O Monitoring
Event Type: PH_DEV_MON_DISK_IO_UTIL
Description: Event containing disk utilization metrics Source:
Microsoft Windows (WMI), Linux (SSH), HP-UX (SSH), IBM AIX (SSH)
NetApp DataONTAP (SNMP)
Key Attributes:
| Name | Id | Type | Description |
| Event Type | eventType | string | Event type set to PH_DEV_MON_DISK_IO_UTIL |
| Event
Severity |
eventSeverity | uint16 | Set to 1. In general, a number between 0 (lowest severity) and 10 (highest severity) |
| Event
Severity Category |
eventSeverityCat | string | Set to Low. IN general, takes the values Low, Medium and High. Event Severities 0-4 are mapped to Low, 5-8 are mapped to Medium and 9-10 are mapped to High |
| Event
Receive Time |
phRecvTime | Date | Time at which AccelOps generated this event |
| Reporting
IP |
reptDevIpAddr | Date | IP address of device reporting this event. In this case set to the device reporting the utilization (same as Host name attribute) |
| Relaying IP | relayDevIpAddr | Date | IP address of device relaying this event from the source to AccelOps. In general it could be a syslog-ng IP address but in this, since AccelOps talks to the device directly, Relaying IP is set to AccelOps IP Address. |
| Raw Event
Log |
rawEventMsg | string | Raw event containing all attributes in comma separated “[Attribute] = value” format. |
| Host name | hostName | string | Host name (as in AccelOps CMDB) of the device whose disk utilization is being reported |
| Host IP
Address |
hostIpAddr | IP | Access IP (as in AccelOps CMDB) of the device whose disk utilization is being reported |
| Disk Name | diskName | string | Disk name |
| Disk Read
Rate (KBps) |
diskReadKBytesPerSec | double | Disk read rate in KBytes/sec. |
| Disk Write
Rate (KBps) |
diskWriteKBytesPerSec | double | Disk write rate in KBytes/sec. |
| Disk Read
Rate (/sec) |
diskReadReqPerSec | double | Disk read rate in read IO per sec. |
| Disk Write
Rate (/sec) |
diskWriteReqPerSec | double | Disk write rate in write IO per sec. |
| Disk IO Util | diskIOUtil | double | Disk I/O utilization |
| Disk Read
Latency (ms) |
devDiskRdLatency | double | Disk Read Latency – for Windows (WMI) only |
| Disk Write
Latency (ms) |
devDiskWrLatency | double | Disk Write latency – for Windows (WMI) only |
| Disk Queue
Length |
diskQLen | uint32 | Disk Queue Length – for Windows (WMI) only |
| Poll Interval | pollIntv | uint32 | Polling interval in seconds. |