Troubleshooting Useful debugging commands

Useful debugging commands

For a comprehensive list of useful debug options you can use the following help commands on the controller:

diagnose wireless-controller wlac help

(this command lists the options available that pertain to the wireless controller)

diagnose wireless-controller wlwtp help

(this command lists the options available that pertain to the AP)

Useful debugging commands

Sample outputs

Syntax

diagnose wireless-controller wlac -c vap

(this command lists the information about the virtual access point, including its MAC address, the BSSID, its

SSID, the interface name, and the IP address of the APs that are broadcasting it)

Result:

bssid              ssid intf     vfid:ip-port rId wId

00:09:0f:d6:cb:12 Office Office ws (0-192.168.3.33:5246) 0 0

00:09:0f:e6:6b:12 Office Office ws (0-192.168.1.61:5246) 0 0

06:0e:8e:27:dc:48 Office Office  ws (0-192.168.3.36:5246) 0 0

0a:09:0f:d6:cb:12 public publicAP ws (0-192.168.3.33:5246) 0 1

Syntax

diagnose wireless-controller wlac -c darrp

(this command lists the information pertaining to the radio resource provisioning statistics, including the AP serial number, the number of channels set to choose from, and the operation channel. Note that the 5GHz band is not available on these APs listed)

Result: