Quarantines (410828)
Quarantined MAC addresses are blocked on the connected FortiSwitches from the network and the LAN.
NOTE: You must enable the quarantine feature in the FortiGate CLI using the set quarantine enable command. You can add MAC addresses to the quarantine list before enabling the quarantine feature, but the quarantine does not go into effect until enabled.
Quarantining a MAC address
Using the FortiGate GUI
- Select the host to quarantine.
- Go to Security Fabric > Physical Topology, right-click on a host, and select Quarantine Host on FortiSwitch.
- Go to Security Fabric > Logical Topology, right-click on a host, and select Quarantine Host on FortiSwitch.
- Go to FortiView > Sources, right-click on an entry in the Source column, and select Quarantine Host on FortiSwitch.
- Click OK to confirm that you want to quarantine the host.
Using the FortiGate CLI
config switch-controller quarantine set quarantine enable edit <MAC_address> set description <string>
set tags <tag1 tag2 tag3 …>
next
next
end
| Option | Description |
| MAC_address | A layer-2 MAC address in the following format: 12:34:56:aa:bb:cc |
| string | Optional. A description of the MAC address being quarantined. |
| tag1 tag2 tag3 … | Optional. A list of arbitrary strings. |
Viewing quarantine entries
Quarantine entries are created on the FortiGate that is managing the FortiSwitch.
Using the FortiGate GUI
- Go to Monitor > Quarantine Monitor.
- Click Quarantined on FortiSwitch.
Using the FortiGate CLI
Use the following command to view the quarantine list of MAC addresses: show switch-controller quarantine
When the quarantine feature is enabled on the FortiGate, it creates a quarantine VLAN (qtn.<FortiLink_port_ name>) on the virtual domain. The quarantine VLAN is applied to the allowed and untagged VLANs on all connected FortiSwitch ports.
Use the following command to view the quarantine VLAN: show system interface qtn.<FortiLink_port_name>
Use the following command to view how the quarantine VLAN is applied to the allowed and untagged VLANs on all connected FortiSwitch ports:
show switch-controller managed-switch
Releasing MAC addresses from quarantine
Using the FortiGate GUI
- Go to Monitor > Quarantine Monitor.
- Click Quarantined on FortiSwitch.
- Right-click on one of the entries and select Delete or Remove All.
- Click OK to confirm your choice.
Using the FortiGate CLI
Use the following commands to delete a quarantined MAC address:
config switch-controller quarantine config targets delete <MAC_address>
end
When the quarantine feature is disabled, all quarantined MAC addresses are released from quarantine. Use the following commands to disable the quarantine feature:
config switch-controller quarantine set quarantine disable
end