Secure Web Gateway, WAN Optimization, Web Caching and WCCP

You can use FortiGate WAN optimization and web caching to improve performance and security of traffic passing between locations on your wide area network (WAN) or from the Internet to your web servers. You can also use the FortiGate unit as an explicit FTP and web proxy server. If your FortiGate unit supports web caching, you can also add web caching to any HTTP sessions including WAN optimization, explicit web proxy and other HTTP sessions.

the next sections of this document describes how FortiGate WAN optimization, web caching, explicit web proxy, explicit FTP proxy and WCCP work and also describes how to configure these features.

Before you begin

Before you begin to configure WAN optimization, Web caching, explicit proxies or WCCP, take a moment to note the following:

• To use WAN optimization and web caching, your FortiGate unit must support these features and not all do. In general your FortiGate unit must include a hard disk to support these features. See “FortiGate models that support WAN optimization” on page 209. Most FortiGate units support Explicit Web and FTP proxies.
• To be able to configure WAN optimization and web caching from the web manager you should begin by going to System > Feature Visibility and turning on WAN Opt. & Cache.
• To be able to configure the Web and FTP proxies from the web manager you should begin by going to System > Feature Visibility and turning on Explicit Proxy.
• If you enable virtual domains (VDOMs) on the FortiGate unit, WAN optimization, web caching, and the explicit web and FTP proxies are available separately for each VDOM.
• This guide is based on the assumption that you are a FortiGate administrator. It is not intended for others who may also use the FortiGate unit, such as FortiClient administrators or end users.
• FortiGate WAN optimization is proprietary to Fortinet. FortiGate WAN optimization is compatible only with

FortiClient WAN optimization, and will not work with other vendors’ WAN optimization or acceleration features.

• FortiGate web caching, explicit web and FTP proxies, and WCCP support known standards for these features. See the appropriate chapters of this document for details.

At this stage, the following installation and configuration conditions are assumed:

• For WAN optimization you have already successfully installed two or more FortiGate units at various locations across your WAN.
• For web caching, the explicit proxies and WCCP you have already successfully installed one or more FortiGate units on your network.
• You have administrative access to the web-based manager and/or CLI. l The FortiGate units are integrated into your WAN or other networks l The operation mode has been configured. l The system time, DNS settings, administrator password, and network interfaces have been configured. l Firmware, FortiGuard Antivirus and FortiGuard Antispam updates are completed.

Secure Web Gateway, WAN Optimization, Web Caching and

WCCP                                                                                             FortiGate models that support WAN optimization

• You Fortinet products have been registered. Register your Fortinet products at the Fortinet Technical Support web site, https://support.fortinet.com.

FortiGate models that support WAN optimization

WAN optimization is available on FortiGate models with internal storage that also support SSL acceleration.

Internal storage includes high-capacity internal hard disks, AMC hard disk modules, FortiGate Storage Modules (FSMs) or over 4 Gbytes of internal flash storage. All of these storage locations can provide similar web caching and byte caching performance. If you add more than one storage location (for example, by creating multiple partitions on a storage device, by using more than one FSM, or by using an FSM and AMC hard disk in the same FortiGate unit) you can configure different storage locations for web caching and byte caching.

Distributing WAN optimization, explicit proxy, and web caching to multiple CPU Cores

By default WAN optimization, explicit proxy and web caching is handled by half of the CPU cores in a FortiGate unit. For example, if your FortiGate unit has 4 CPU cores, by default two will be used for WAN optimization, explicit proxy and web caching. You can use the following command to change the number of CPU cores that are used.

config system global set wad-worker-count <number>

end

The value for <number> can be between 1 and the total number of CPU cores in your FortiGate unit. Adding more cores may enhance WAN optimization, explicit proxy and web caching performance and reduce the performance of other FortiGate systems.

Toggling Disk Usage for logging or wan-opt

Both logging and WAN Optimization use hard disk space to save data. In FortiOS, you cannot use the same hard disk for WAN Optimization and logging.

• If the FortiGate has one hard disk, then it can be used for either disk logging or WAN optimization, but not both. By default, the hard disk is used for disk logging.
• If the FortiGate has two hard disks, then one disk is always used for disk logging and the other disk is always used for WAN optimization.

On the FortiGate, go to System > Advanced > Disk Settings to switch between Local Log and WAN Optimization.

You can also change disk usage from the CLI using the following command:

configure system global set disk-usage {log | wanopt} end

You can configure WAN Optimization from the CLI or the GUI. To configure WAN Optimization from the GUI you must go to System > Feature Visibility and turn on WAN Optimization.

Enabling WAN Optimization affects more than just disk logging

In addition to affecting WAN Optimization, the following table shows other features affected by the FortiGate disk configuration.

Features affected by Disk Usage as per the number of internal hard disks on the FortiGate

Basic WAN optimization topology