Abbreviating Commands
You only have to enter enough characters for the CLI to recognize the command as unique. This example shows how to enter the show security command, with the command show abbreviated to sh:
Lab‐mc3200# sh security‐profile default
Security Profile Table
Security Profile Name : default
L2 Modes Allowed : clear
Data Encrypt : none
Primary RADIUS Profile Name :
Secondary RADIUS Profile Name :
WEP Key (Alphanumeric/Hexadecimal) : *****
Static WEP Key Index : 1
Re‐Key Period (seconds) : 0
Captive Portal : disabled
802.1X Network Initiation : off Tunnel Termination: PEAP, TTLS
Shared Key Authentication : off
Pre‐shared Key (Alphanumeric/Hexadecimal) : *****
Group Keying Interval (seconds) : 0
Key Rotation : disabled
Reauthentication : off
MAC Filtering : off
Firewall Capability : none
Firewall Filter ID :
Security Logging : off
Allow mentioned IP/Subnet to pass through Captive portal : 0.0.0.0
Subnet Mask for allowed IP/Subnet to pass through Captive portal : 0.0.0.0