FortiGate–900D fast path architecture
The FortiGate-900D includes two NP6 processors that are not connected by an integrated switch fabric (ISF). Without an ISF, traffic through a FortiGate-900D could experience lower latency than traffic through similar hardware with an ISF. The NP6 processors are connected to network interfaces as follows:
Because the FortiGate-900D does not have an ISF you cannot create Link Aggreg- ation Groups (LAGs) that include interfaces connected to both NP6 processors.
- Eight 1Gb SFP interfaces (port17-port24), eight 1Gb RJ-45 Ethernet interfaces (port25-32) and one 10Gb SFP+ interface (portB) share connections to the first NP6 processor.
- Eight 1Gb SFP interfaces (port1-port8), eight RJ-45 Ethernet interfaces (port9-16) and one 10Gb SFP+ interface (portA) share connections to the second NP6 processor.
MGMT 1
1 3 5 7
9 11
13 15
10G SFP+
17 19 21 23
25 27
29 31
FortiGate 900D
USB
CONSOLE
USB MGMT
MGMT 2
FortiASIC NP6
FortiASIC NP6
System Bus
CP8
CPU
CP8
You can use the following get command to display the FortiGate-900D NP6 configuration. The command output shows two NP6s named NP6_0 and NP6_1. The output also shows the interfaces (ports) connected to each NP6. You can also use the diagnose npu np6 port-list command to display this information.
get hardware npu np6 port-list
Chip XAUI Ports Max Cross-chip
Speed offloading
—— —- ——- —– ———- np6_0 0
1 port17 1G Yes
1 port18 1G Yes
1 port19 1G Yes
1 port20 1G Yes
1 port21 1G Yes
1 port22 1G Yes
1 port23 1G Yes
1 port24 1G Yes
1 port27 1G Yes
1 port28 1G Yes
1 port25 1G Yes
1 port26 1G Yes
1 port31 1G Yes
1 port32 1G Yes
1 port29 1G Yes
1 port30 1G Yes
2 portB 10G Yes
3
—— —- ——- —– ———- np6_1 0
1 port1 1G Yes
1 port2 1G Yes
1 port3 1G Yes
1 port4 1G Yes
1 port5 1G Yes
1 port6 1G Yes
1 port7 1G Yes
1 port8 1G Yes
1 port11 1G Yes
1 port12 1G Yes
1 port9 1G Yes
1 port10 1G Yes
1 port15 1G Yes
1 port16 1G Yes
1 port13 1G Yes
1 port14 1G Yes
2 portA 10G Yes
3