Configuring Virtualization
AccelOps supports these virtualization servers for discovery and monitoring.
HyperV Configuration
VMware ESX Configuration
HyperV Configuration
What is Discovered and Monitored
| Protocol | Information discovered | Metrics collected | Used for |
| Powershell over WMI | CPU, Memory, Network and Storage metrics both at Guest and Host level . | Performance Monitoring |
PH_DEV_MON_HYPERV_CPU_GUEST_VIRTUAL_PROC: HyperV Guest Virtual Processor Usage
PH_DEV_MON_HYPERV_MEM_VID_PARTITION_PER_VM: HyperV per-VM VID Partition Memory Usage
[PH_DEV_MON_HYPERV_MEM_VID_PARTITION_PER_VM]:[phyMachIpAddr]=172.16 .20.180,[phyMachName]=WIN-HH2MFBPMHMR,[hostIpAddr]=172.16.20.185,[h ostName]=accelops-reporter-hyperv-4.3.1.1158,[vmName]=accelops-repo rter-hyperv-4.3.1.1158,[physicalPages]=1050632,[remotePages]=0
PH_DEV_MON_HYPERV_MEM_OVERALL: HyperV Root Memory Usage
[PH_DEV_MON_HYPERV_MEM_OVERALL]:[hostIpAddr]=172.16.20.180,[hostNam e]=WIN-HH2MFBPMHMR,[freeMemKB]=27519348,[pageFaultsPersec]=0
PH_DEV_MON_HYPERV_NET_VIRTUAL_SWITCH: HyperV Virtual Switch Network Usage
[PH_DEV_MON_HYPERV_NET_VIRTUAL_SWITCH]:[hostIpAddr]=172.16.20.180,[ hostName]=WIN-HH2MFBPMHMR,[vSwitch]=broadcom bcm5709c netxtreme ii gige [ndis vbd client] _34 – virtual
switch,[recvBitsPerSec]=719403.45,[recvPktsPerSec]=323.03,[sentBits PerSec]=3382443.50,[sentPktsPerSec]=283.90,[totalPktsPerSec]=323.03 [PH_DEV_MON_HYPERV_NET_VIRTUAL_SWITCH]:[hostIpAddr]=172.16.20.180,[ hostName]=WIN-HH2MFBPMHMR,[vSwitch]=broadcom bcm5709c netxtreme ii gige [ndis vbd client] _34 – virtual
switch,[recvBitsPerSec]=719403.45,[recvPktsPerSec]=323.03,[sentBits PerSec]=3382443.50,[sentPktsPerSec]=283.90,[totalPktsPerSec]=323.03
PH_DEV_MON_HYPERV_NET_VIRTUAL_ADAPTER: HyperV Virtual Switch Per Adapter Network Usage
[PH_DEV_MON_HYPERV_NET_VIRTUAL_ADAPTER]:[phyMachIpAddr]=172.16.20.1 80,[phyMachName]=WIN-HH2MFBPMHMR,[hostIpAddr]=172.16.20.182,[hostNa me]=accelops-va-hyperv-4.3.1.1158,[vmName]=accelops-va-hyperv-4.3.1 .1158,[intfName]=adapter_e1eb0a1f-1b36-48fe-be79-fde20d335364–3157 5d2f-5085-45d3-905f-2f3e17342a81,[recvBitsPerSec]=64970.24,[recvPkt sPerSec]=20.86,[sentBitsPerSec]=124741.68,[sentPktsPerSec]=42.61,[t otalPktsPerSec]=20.86
PH_DEV_MON_HYPERV_STORAGE_VIRTUAL_STORAGE: HyperV Virtual Storage Usage
HyperV Disk I/O Warning
HyperV Disk I/O Critical
HyperV Guest Critical
HyperV Guest Hypervisor Run Time Percent Warning
HyperV Logical Processor Total Run Time Percent Critical
HyperV Logical Processor Total Run Time Percent Warning
HyperV Page fault Critical
HyperV Page fault Warning
HyperV Remainining Guest Memory Warning
Reports
Look in Analytics > Reports > Device > Server > HyperV
HyperV Configuration and Health
Top HyperV Guests By Virtual Processor Run Time Pct
Top HyperV Guests by Large Page Size Usage
Top HyperV Guests by Remote Physical Page Usage
Top HyperV Root Partitions By Virtual Processor Run Time Pct
Top HyperV Root Partitions by Large Page Size Usage
Top HyperV Servers By Logical Processor Run Time Pct
Top HyperV Servers by Disk Activity
Top HyperV Servers by Disk Latency
Top HyperV Servers by Large Page Size Usage
Top HyperV Servers by Memory Remaining for Guests
Top HyperV Servers by Remote Physical Page Usage
Configuration
AccelOps needs WMI credentials to get the HyperV performance metrics. Configure this following the guidelines described in Microsoft Windows Server Configuration.
Settings for Access Credentials
Configure WMI on AccelOps
VMware ESX Configuration
What is Discovered and Monitored
Configuration
Settings for Access Credentials
What is Discovered and Monitored
| Protocol | Information discovered | Metrics collected | Used for |
| VMWare
SDK |
ESX Server and the Guest hosts running on that server. ESX host clusters. Hardware (CPU, Memory, Disk, network Interface) for all guests, OS vendor and version for all guests. Virtual switch for connecting guest hosts to network interfaces. | Both ESX level and guest host level performance metrics. Guest host level metrics include CPU/memory/disk utilization, CPU Run/Ready/Limited percent, memory swap in/out rate, free memory state, disk read/write rate/latency, network interface utilization, errors, bytes in/out.
ESX level metrics include physical CPU utilization, ESX kernel disk read/writre latency etc |
Performance
Monitoring |
| VMWare
SDK |
ESX logs include scenarios like ESX level login sucess/failure, configuration change, Guest host movement, account creation and modification | Availability,
Change and Security Monitoring |
Configuration
AccelOps discovers and monitors VMware ESX servers and guests over the the VMware SDK. Make sure that VMware Tools is installed on all the guests in your ESX deployment, and AccelOps will be able to obtain their IP addresses.
Settings for Access Credentials
Configuring VPN Gateways
AccelOps supports these VPN gateways for discovery and monitoring.
Cisco VPN 3000 Gateway Configuration
Juniper Networks SSL VPN Gateway Configuration
Microsoft PPTP VPN Gateway Configuration PulseSecure Configuration
Cisco VPN 3000 Gateway Configuration
What is Discovered and Monitored
Event Types
Rules
Reports
Configuration
SNMP
Syslog
Sample Parsed Cisco VPN 3000 Syslog Messages Settings for Access Credentials
What is Discovered and Monitored
| Protocol | Information Discovered | Metrics Collected | Used For |
| SNMP | |||
| Syslog |
Event Types
In CMDB > Event Types, search for “cisco_vpn” in the Name and Device Type column to see the event types associated with this device.
Rules
There are no predefined rules for this device.
Reports
There are no predefined reports for this device.
Configuration
SNMP
- Log in to your device with administrative credentials.
- Go to Configuration > System > Management Protocols > SNMP Communities.
- Click Add.
- For Community String, enter public.
Syslog
- Go to Configuration > System > Events > Syslog Servers.
- Click Add.
- Enter the IP address of your AccelOps virtual appliance for Syslog Server.
- Add a syslog server with AccelOps IP address
Sample Parsed Cisco VPN 3000 Syslog Messages
Settings for Access Credentials