Customizing Dashboards
FortiSIEM includes several dashboards for device types and IT functional areas, but you can also customize and create new dashboards and widgets.
Adding Custom Columns to Dashboards
Adding Widgets to Dashboards
Creating a Customized Dashboard Setting a Dashboard to Home
Adding Custom Columns to Dashboards
You may want to add custom columns based on event attributes to a Summary dashboard. This topic explains how to create a custom set of columns using the example of a hardware temperature readout, and then add them to a dashboard.
Prerequisites
Procedure
Prerequisites
Read the topic How Values in Dashboard Columns are Derived
Procedure
- Find the event that contains the attribute you want to use.
In this case, you want to create a hardware temperature reading. The event PH_DEV_MON_HW_TEMP contains the attribute envTempDeg C.
- Go to Admin > Device Support > Dashboard Columns.
- Click New.
- For Name, enter the display name for the new metric you want to collect. For this example, enter the name Temperature Reading.
- For Event Type, click the Edit icon and select the event you want to use.
For this example, select PH_DEV_MON_HW_TEMP.
- Click the + icon to add a column. As you complete each column, click OK, then click + to add more columns.
For each event type, you will typically create three columns: a Host column that contains IP information for associated hosts, an Object c olumn that includes information about the object being reported on, and a Reading column that contains the metric you want to report on.
Note that you could create additional Reading columns for other attributes contained in your event.
| Column Type | Example Settings |
| Host | Attributes: hostIpAddr
Aggregator: N/A Display Name: N/A Format: N/A Trend Chart: N/A Type: Host |
| Object | Attributes: hwComponentName
Aggregator: N/A Display Name: N/A Format: N/A Trend Chart: N/A Type: Object |
| Reading | Attributes: envTempDegC
Aggregator: AVG|MAX Display Name: Temp Format: DegreeC Trend Chart: Health Type: Reading |
- When you’re finished adding columns, click OK.
The new column you created will appear in the Admin > Device Support > Dashboard Columns.
- Select your new column in the list, and then click Apply.
- To add your column to a dashboard, navigate to the dashboard.
- In the dashboard, click Select Columns.
- Under Event Types, select the event type you used to create the new column.
The columns associated with that event type will be listed under Columns, and the Attribute Name will list the attribute you used to
create the column.
- Under Columns, select your column and use the >> button to move it into the Selected Columns.
- Use the up and down position buttons to place the column in the order where you want it to appear in the dashboard.
- Click OK.
Your new column will appear in the dashboard.