System Settings -FortiAnalyzer – Dashboard FortiOS 6.2.3
Dashboard The Dashboard contains widgets that provide performance and status information and enable you to configure basic system settings. The following widgets are available: Widget Description...
View ArticleSystem Information Widget – FortiAnalyzer – FortiOS 6.2.3
System Information widget The information displayed in the System Information widget is dependent on the FortiAnalyzer model and device settings. The following information is available on this widget:...
View ArticleSystem Settings – FortiAnalyzer – Changing the Host Name
Changing the host name The host name of the FortiAnalyzer unit is used in several places. l It appears in the System Information widget on the dashboard. l It is used in the command prompt of the CLI....
View ArticleSystem Settings – FortiAnalyzer – FortiOS 6.2.3 – Configuring The System Time
Configuring the system time You can either manually set the FortiAnalyzer system time or configure the FortiAnalyzer unit to automatically keep its system time correct by synchronizing with a Network...
View ArticleSystem Settings – FortiAnalyzer – Updating The System Firmware – FortiOS 6.2.3
Updating the system firmware To take advantage of the latest features and fixes, the FortiAnalyzer firmware can be updated. For information about upgrading your FortiAnalyzer device, see the...
View ArticleSystem Settings – FortiAnalyzer – FortiOS 6.2.3 – Backing up the system
Backing up the system Fortinet recommends that you back up your FortiAnalyzer configuration to your management computer on a regular basis to ensure that, should the system fail, you can quickly get...
View ArticleSystem Settings – FortiAnalyzer – FortiOS 6.2.3 – Restoring The Configuration
Restoring the configuration You can use the following procedure to restore your FortiAnalyzer configuration from a backup file on your management computer. To restore the FortiAnalyzer configuration:...
View ArticleSystem Settings – FortiAnalyzer – FortiOS 6.2.3 – Migrating the Configuration
Migrating the configuration You can back up the system of one FortiAnalyzer model, and then use the CLI and the FTP, SCP, or SFTP protocol to migrate the settings to another FortiAnalyzer model. If you...
View ArticleSystem Settings – FortiAnalyzer – FortiOS 6.2.3 – Configuring the Operation Mode
Configuring the operation mode The FortiAnalyzer unit has two operation modes: Analyzer and Collector. When FortiAnalyzer is operating in Collector mode, the SQL database is disabled by default so logs...
View ArticleWidgets – FortiAnalyzer – FortiOS 6.2.3
System Settings System Resources widget The System Resources widget displays the usage status of the CPUs, memory, and hard disk. You can view system resource information in real-time or historical...
View ArticleLogging Topology – FortiAnalyzer – FortiOS 6.2.3
Logging Topology The Logging Topology pane shows the physical topology of devices in the Security Fabric. Click, hold, and drag to adjust the view in the content pane, and double-click or use the...
View ArticleConfiguring Network Interfaces – FortiAnalyzer – FortiOS 6.2.3
Network Configuring network interfaces Fortinet devices can be connected to any of the FortiAnalyzer unit’s interfaces. The DNS servers must be on the networks to which the FortiAnalyzer unit connects,...
View ArticleDisabling Ports – FortiAnalyzer – FortiOS 6.2.3
Disabling ports Ports can be disabled to prevent them from accepting network traffic To disable a port: Go to System Settings > Network and click All Interfaces. The interface list opens....
View ArticleChanging Administrative Access – FortiAnalyzer – FortiOS 6.2.3
Changing administrative access Administrative access defines the protocols that can be used to connect to the FortiAnalyzer through an interface. The available options are: HTTPS, HTTP, PING, SSH,...
View ArticleStatic routes – FortiAnalyzer – FortiOS 6.2.3
Static routes Static routes can be managed from the routing tables for IPv4 and IPv6 routes. The routing tables can be accessed by going to System Settings > Network and clicking Routing Table and...
View ArticlePacket capture – FortiAnalyzer – Packet Capture
Packet capture Packets can be captured on configured interfaces by going to System > Network > Packet Capture. The following information is available: Interface The name of the configured...
View ArticleRAID Management – FortiAnalyzer – FortiOS 6.2.3
RAID Management RAID helps to divide data storage over multiple disks, providing increased data reliability. For FortiAnalyzer devices containing multiple hard disks, you can configure the RAID array...
View ArticleSystem Resources widget – FortiAnalyzer – FortiOS 6.2.3
System Resources widget The System Resources widget displays the usage status of the CPUs, memory, and hard disk. You can view system resource information in real-time or historical format, as well as...
View ArticleLicense Information widget – FortiAnalyzer – FortiOS 6.2.3
License Information widget The License Information widget displays the number of devices connected to the FortiAnalyzer. VM License VM license information and status. Click the upload license button to...
View ArticleAlert Messages Console widget – FortiAnalyzer – FortiOS 6.2.3
Alert Messages Console widget The Alert Message Console widget displays log-based alert messages for both the FortiAnalyzer unit itself and connected devices. Alert messages help you track system...
View Article