Clik here to view.
FortiWAN Using The Web UI
Using the Web UI Web UI Overview Once you log in, you will see the operating page that is divided into three parts, the header is locate the upper side of the screen, the navigation menu is located on...
View ArticleConsole Mode Commands
Console Mode Commands This section provides further details on the Console mode commands. Before logging onto serial console via HyperTerminal, please ensure the following settings are in place: Bits...
View ArticleFortiWAN Configuring Network Interface (Network Setting)
Configuring Network Interface (Network Setting) As an edge router of a network site, FortiWAN is supposed to operate with connected networks, the WAN, LAN and DMZ networks. FortiWAN must guarantee...
View ArticleSet DNS server to FortiWAN
Set DNS server to FortiWAN As an edge router, FortiWAN connects the external and internal networks to provide necessary valuable functions for incoming and outgoing service accesses. Among the...
View ArticleClik here to view.
FortiWAN Aggregated, Redundant, VLAN Ports and Port Mapping
Aggregated, Redundant, VLAN Ports and Port Mapping Go to System > Network Setting from the Web UI, click the label VLAN and Port Mapping in the upper-right corner to expand the configuration panel....
View ArticleClik here to view.
Configuring networks to FortiWAN
Configuring networks to FortiWAN As the previous description, FortiWAN is an intelligent WAN load balancing device providing services to increase connection efficiency and reliability between the...
View ArticleClik here to view.
Routing-mode WAN link
Routing-mode WAN link Configuration of a routing-mode WAN link starts from selecting and enabling the WAN link on Web UI (see Start to configure a WAN link in Configuring your WAN and DMZ), and select...
View ArticleClik here to view.
Bridge-mode (multiple static IP) WAN link
Bridge-mode (multiple static IP) WAN link Configuration of a multiple-static-IP bridge-mode WAN link starts from selecting and enabling the WAN link on Web UI (see Start to configure a WAN link in...
View ArticleClik here to view.
Bridge-mode (one static IP) WAN link
Bridge-mode (one static IP) WAN link Configuration of a one-static-IP bridge-mode WAN link starts from selecting and enabling the WAN link on Web UI (see Start to configure a WAN link in Configuring...
View ArticleFortiWAN Configurations for a WAN link in Brideg Mode: PPPoE
Configurations for a WAN link in Brideg Mode: PPPoE [Bridge Mode: PPPoE] is used for PPPoE WAN link (ISP provides dynamic or static IP addresses via PPPoE). In [Basic Settings], you shall configure...
View ArticleClik here to view.
LAN Private Subnet
LAN Private Subnet [LAN Private Subnet] is the second most important part for deploying FortiWAN in your network. In contrast with configurations on WAN Settings to active the WAN link transmission...
View ArticleClik here to view.
FortiWAN WAN/DMZ Private Subnet
WAN/DMZ Private Subnet After having gone through public subnet configurations, let’s move to private subnet settings. This section lists a few typical topology structures for private subnet. Similarly,...
View ArticleClik here to view.
[Static Routing Subnet]: Subnet in WAN
[Static Routing Subnet]: Subnet in WAN This topology is found where IPv4 private static routing subnet is located on the WAN. In other words, the private subnet on the WAN does not connect to FortiWAN...
View ArticleClik here to view.
[Static Routing Subnet]: Subnet in DMZ
[Static Routing Subnet]: Subnet in DMZ In this topology, in DMZ you create an IPv4 private subnet using one router (its IP, say, 192.168.34.50). But the subnet (its IP 192.168.99.0/24) does not...
View ArticleClik here to view.
Automatic addressing within a basic subnet
Automatic addressing within a basic subnet FortiWAN functions for various network topologies which consists of connectivity of multiple subnets (basic subnet). Deployments of basic subnets varies for...
View ArticleClik here to view.
Deployment Scenarios for Various WAN Types
Deployment Scenarios for Various WAN Types This Section provides various network scenarios for the different WAN types and explains how FortiWAN can easily be integrated into any existing networks. WAN...
View ArticleMIB fields for WAN links and VLANs
MIB fields for WAN links and VLANs You can use SNMP manager to get information of defined WAN links and VLANs and receive notifications when a WAN link fails or recovers. Configure SNMP for your...
View ArticleFortiWAN – System Configurations
System Configurations This topic elaborates on [System] and its submenus. Simple examples are given to illustrate how to configure [system] settings. Summary As soon as you log in to the web UI, you...
View ArticleFortiWAN – Optimum Route Detection
Optimum Route Detection FortiWAN’s Optimum Route is a particular load balancing algorithm which determines the best WAN link for Auto Routing and Multihoming by involving real Internet conditions in...
View ArticleFortiWAN – Port Speed/Duplex Settings
Port Speed/Duplex Settings [Port Speed/Duplex Settings] enables to configure port speed and duplex transfer mode. Generally it is set to auto-detect by default which works properly in most cases....
View Article